The majority of solid softwood mouldings are produced from Scandinavian Pine and contain knots. They are easily worked with traditional hand and power tools and accept fixings and stains/paints and varnishes well. If an opaque coating is desirable ensure any visible knots are sealed with a good quality shellac knotting solution to avoid/minimise resin bleeding through the subsequent surface coatings. In a centrally heated home, lateral shrinkage of 2.5 - 3% is quite normal for machined profiles.
PINE QUADRANT available: 6mm x 6mm 10mm x 10mm 12mm x 12mm 14.5mm x 14.5mm 16mm x 16mm 18mm x 18mm 19mm x 19mm 21mm x 21mm
PINE SCOTIA available: 12mm x 12mm 15mm x 15mm 18mm x 18mm 21mm x 21mm 42mm x 42mm
PINE D MOULD available: 4mm x 18mm 4mm x 21mm 4mm x 29mm 4mm x 37mm 6mm x 27mm 8mm x 34mm
OVOLO PINE DOORSTOP available: 12mm x 21mm 12mm x 33mm 12mm x 44mm
OGEE PINE PANEL MOULD 8mm x 20.5mm
OGEE PINE PANEL MOULD 8mm x 27mm
OGEE PINE PANEL MOULD 12mm x 33mm
OGEE PINE PANEL MOULD 14.5mm x 44mm
PINE DOUBLE ASTRAGAL 8mm x 21mm
PINE DOUBLE ASTRAGAL 12mm x 34mm
PINE DOUBLE ASTRAGAL 15mm x 34mm
PINE DOUBLE ASTRAGAL 20.5mm x 44mm
PINE HALF ROUND available: 4mm x 21mm 4mm x 25mm 8mm x 21mm
PINE PARTING BEAD available: 20mm x 8mm
PINE STAFF BEAD available: 20mm x 15mm
PINE ANGLE BEAD / CUSHION CORNER available: 20mm x 20mm 27mm x 27mm 34mm x 34mm 42mm x 42mm
